A complete pipe and drape kit with everything you need for an 8 foot high x 5 0 foot wide backdrop! What's Included In The Listing. 6 pieces: 8'H Fixed Silver Aluminum Slip-Fit Uprights, 1.5 Diameter. 6 pieces: 16" x 14" Silver Steel Slip-Fit Bases with Base Pins (optional base edge protectors). 5 piece: Adjustable 6-10 Foot Width Silver Aluminum Drape Support Rod.
15 pieces: 94"H x 60"W Premium Drape. Choose drape color from drop-down menu.Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering. Premium drapes may have dye lot differences. The edges of these bases can be raw or rough. Edge protectors help protect your hands and the flooring.
Premium drape is a heavier weight fabric than our Economy drape and has a look and feel of a linen napkin or tablecloth at a fine dining restaurant. Premium drape blocks approximately 70-80% of light.It is regarded as a step up from Economy drape in both fabric weight and style (the finish is matte and it does not have the open weave pattern that the Economy drapes have). This Durably Flame Retardant (DFR) fabric is designed to pass the NFPA 701 fire code. This opacity scale is an approximation under normal circumstances. A variety of factors can affect the opacity, including the amount of back-lighting, spacing from a wall, and the overall brightness of the lighting used in a room. For example, using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. For situations in which the drape must be completely opaque, it is recommended that you use our Commando or Velour fabrics.
They are machine washable (gentle cycle, like colors, cold water, mild liquid detergent should be applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with drape as it may alter the color), can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140.All drapes will be the color selected from the drop-down menu. Size - 96"H x 1.5" diameter Weight - Approximately 2.1 lbs each Material - Aluminum Color - Silver Other - Four 90° slots are cut out at 36H and at the top.
Size - 16" x 14" with stacking slot Weight. Approximately 10 lbs each with included 3H steel base pin. Material - Steel Color - Silver Other - Edge protectors optional.Drape Support Rod (horizontal pipe). Size - 72"L at collapsed size, 120"L at fully extended size, 1.5 diameter Weight - Approximately 3.5 lbs.
Weight capacity is 15 lbs. Material - Aluminum Color - Silver Other - Adjustable from 6 to 10 feet wide.Button stop at 8 and 10 foot intervals. What Is The Slip-Fit System? The slip-fit system is designed to be a tremendous time saver for setting up and breaking down your pipe and drape display.
The uprights are hollow, allowing them to simply slip over the base pin (included with each base). The drape support rod features steel hooks at each end that slip inside of one of the four slots cut out at the top of the upright. Estimated set-up time varies based on the number of people and the speed at which he or she works, but should average about 5-10 minutes per 10 foot wide section once the boxes are unpacked. The only tool required is a flat head screwdriver to screw the base pin onto the base (a very simple task).Other than that, no tools for assembly are required. To achieve a 50 foot total width, two uprights and bases would be set up with a support rod in between, and then a second support rod would be hooked into the other side of the (now middle) upright.
The far end is finished with the third upright and base. This process would be repeated until all of the parts are used. Because each upright has 4 slots cut out, you could make either a linear 50 foot span, an "L" shape, a "T" shape, or a box by using different combinations of the open 90 degree angle slots at the top of each upright. Are intended for indoor, decorative use only.
They should never be used where tip-over may cause injury or damage. Failure to use these products as intended will likely affect the safety of the products used and can result in injury or damage for which we are not responsible. The maximum weight capacity for the drape support rod is 15 pounds. Any box that is delivered, or component piece within a box, may be sharp, and should be handled with care.
We answer any and all questions as quickly as possible. We also sell all component pieces separately if an entire kit is not needed.
This item is in the category "Home & Garden\Wedding Supplies\Venue Decorations". The seller is "act201" and is located in this country: US. This item can be shipped to United States.